networkupsslave

2021年10月31日 — I've installed and configured Network UPS Tools so that HA is Master. I'd like have my QNAP NAS monitor the UPS as a slave unit to HA.

Connect the UPS to the same network as the NAS. · Select Network UPS slave. · Specify the IP address of the UPS server. · Choose one of the following options.

2022年4月12日 — The Slave systems only run upsmon in slave mode. This is useful when you have a very large UPS that's capable of running multiple systems ...

2019年12月30日 — Hello Guys. After a few HOURS, I got it working. So, I got a new APC UPS with USB, plugged it to my Qnap nas and it was up and running with ...

For multiple devices, Network UPS Master Server can be used to notify the clients. QNAP NAS supports Network UPS Slave mode. But it does not have Network ...

After a UPS becomes critical, the slave will wait up to HOSTSYNC seconds for the master to set the FSD flag. If that timer expires, the slave will assume that ...

When a UPS goes critical (on battery + low battery, or FSD: forced shutdown), the slaves are supposed to disconnect and shut down right away. The HOSTSYNC ...

2023年1月2日 — I have the master/slave ups running great on all 4 QNAP devices but since the UPS only has 1 USB port, I cannot do power management outside of ...

選擇［網路UPS slave］。 指定UPS 伺服器的IP 位址。 選擇下列其中一個選項。 電源中斷一段時間後關閉伺服器. 電源中斷一段時間後允許NAS 進入自動保護模式. 按一下 ...

2014年3月23日 — 4. 按[啟動Network UPS master ]。這個選項只在NAS以USB連接線和UPS連接的時候才會出現。 5. 輸入其他UPS slave的IP位址， ...